Unfortunately, more and more phones are ditching the standard headphone jack in favor of USB-C. Besides not being able to charge and play music at the same time, this also means that your options are fairly limited if you want a good pair of earbuds to use every day. Of course, you could always use any of the earbuds on this list with a dongle, but if dongles aren’t your style then don’t worry. We have a list of the best USB-C earbuds you can get so make sure to check that out if none of these piqued your interest.
Though the sound quality definitely favors the low-end, it’s not an overbearing experience. They keep the fun sound that many of us like without overdoing it—or forgetting about the mids and the highs. The treble, in particular, has good detail but they do get kind of harsh at high volume. Luckily they also get pretty loud. Just don’t crank them up too loud if you want to avoid noise-induced hearing loss.
Magnetostriction headphones, sometimes sold under the label Bonephones, work by vibrating against the side of head, transmitting sound via bone conduction. This is particularly helpful in situations where the ears must be unobstructed, or for people who are deaf for reasons that don't affect the nervous apparatus of hearing. Magnetostriction headphones though, are limited in their fidelity compared to conventional headphones that rely on the normal workings of the ear. Additionally, in the early 1990s, a French company called Plasmasonics tried to market a plasma-ionisation headphone. There are no known functioning examples left.
With small extrusions emerging from otherwise understated wireless in-ears, Jabra’s Elite Active 65t look like miniature versions of the Bluetooth headsets that helped put the brand on the map. But don’t be fooled by the looks — with sweatproofing, excellent sound quality, and a myriad of useful features, these little guys beat out every other pair of headphones on the market as the best workout headphones.
The Master & Dynamic MW07 Plus is the second generation of the company's MW07. It features greatly increased battery life (10 versus 3.5 hours), Bluetooth 5.0 and active noise-cancellation with two microphones on each bud. It may not fit everyone's ear equally well, but they certainly have a distinct look, as well as very good sound and a great listening experience if you can get a tight seal. These in-ear headphones are known for more of an audiophile sound profile, with smooth, well-balanced sound and well-defined bass, and the MW07 Plus delivers that kind of sound.
Pairing high sensitivity headphones with power amplifiers can produce dangerously high volumes and damage headphones. The maximum sound pressure level is a matter of preference, with some sources recommending no higher than 110 to 120 dB. In contrast, the American Occupational Safety and Health Administration recommends an average SPL of no more than 85 dB(A) to avoid long-term hearing loss, while the European Union standard EN 50332-1:2013 recommends that volumes above 85 dB(A) include a warning, with an absolute maximum volume (defined using 40–4000 Hz noise) of no more than 100 dB to avoid accidental hearing damage. Using this standard, headphones with sensitivities of 90, 100 and 110 dB (SPL)/V should be driven by an amplifier capable of no more than 3.162, 1.0 and 0.3162 RMS volts at maximum volume setting, respectively to reduce the risk of hearing damage.
In early powered radios, the headphone was part of the vacuum tube's plate circuit and carried dangerous voltages. It was normally connected directly to the positive high voltage battery terminal, and the other battery terminal was securely grounded. The use of bare electrical connections meant that users could be shocked if they touched the bare headphone connections while adjusting an uncomfortable headset.
The moving coil driver, more commonly referred to as a "dynamic" driver is the most common type used in headphones. It consists of a stationary magnet element affixed to the frame of the headphone, which sets up a static magnetic field. The magnet in headphones is typically composed of ferrite or neodymium. A voice coil, a light coil of wire, is suspended in the magnetic field of the magnet, attached to a diaphragm, typically fabricated from lightweight, high-stiffness-to-mass-ratio cellulose, polymer, carbon material, paper or the like. When the varying current of an audio signal is passed through the coil, it creates a varying magnetic field that reacts against the static magnetic field, exerting a varying force on the coil causing it and the attached diaphragm to vibrate. The vibrating diaphragm pushes on the air to produce sound waves.
Today they are typically used only in in-ear headphones and hearing aids, where their high efficiency and diminutive size is a major advantage. They generally are limited at the extremes of the hearing spectrum (e.g. below 20 Hz and above 16 kHz) and require a better seal than other types of drivers to deliver their full potential. Higher-end models may employ multiple armature drivers, dividing the frequency ranges between them using a passive crossover network. A few combine an armature driver with a small moving-coil driver for increased bass output.
The Bose Soundsport Free are wirefree earbuds (also known as true wireless earbuds). At 1.5 inches deep and 1.25 inches wide, these do stick out of yours ears a little bit, but they sound so good that you might not care. The soft silicone rubber fins rest just outside of your ear canal, so they don't make your ears hurt, and let in just enough ambient noise to warn you when a cyclist or angry dog is approaching. Their sleek clamshell case holds enough power for two full recharges. If you can overlook a barely perceptible lag while watching videos on your phone (and high price tag), these might be the best workout headphones for you.
What's most impressive about the EarFun Free is the features: Bluetooth 5.0, both USB-C and wireless charging and fully waterproof (IPX7), according to their specs. Do they sound fantastic? No, but they sound pretty good. They don't have the clarity of higher-end true wireless earbuds that cost $150 or more, but they do have plump bass and enough detail to avoid sounding dull. They're also pretty solid for making calls. An excellent value at less than $45.
The Triple Driver’s sound signature provides sparkling clarity, smooth and powerful bass, and balanced sound that outdoes everything we’ve heard at a similar price point. These headphones provide exceptional sound for anything you listen to, from electronica to acoustic folk. Need we say more? Oh, and if you’re rocking a new iPhone and you hate the adapter, there’s a Lightning version, too.
If the damage is done there’s nothing that can currently undo it. On the bright side, you can learn more about how hearing loss occurs by reading our explainer piece. You can still take care of your remaining hearing by limiting volume levels to 85dB. That’s the recommended limit for safe-listening, and because earbuds are much closer to your ears than the speakers at a concert it’s even more important to keep that limit in mind.
The Powerbeats Pro are an impressive pair of fully wireless buds, but there is one serious drawback we need to point out. The Powerbeats Pro suffered connectivity issues throughout our tests, especially in high-traffic areas or with a phone p;aced in a back pocket. We regularly experienced dropouts while wearing these while running, and the issue repeated across multiple test units and even when using different phones. Your mileage may vary, and hopefully the connection kinks will be worked out on later iterations, but we’d be remiss not to mention the issue.
We’re totally convinced the Sony WH-1000xM3 will be the best pick for most people, but if you’re looking for some alternatives, we have you covered there, too. We identified seven other models that are more than worthy of your consideration, each with their own specific strengths, whether it’s for use during a workout — or merely to keep you from giving your credit card too much of a workout.
Sensitivity is a measure of how effectively an earpiece converts an incoming electrical signal into an audible sound. It thus indicates how loud the headphones are for a given electrical drive level. It can be measured in decibels of sound pressure level per milliwatt (dB (SPL)/mW) or decibels of sound pressure level per volt (dB (SPL) / V). Unfortunately, both definitions are widely used, often interchangeably. As the output voltage (but not power) of a headphone amplifier is essentially constant for most common headphones, dB/mW is often more useful if converted into dB/V using Ohm's law:
Both of Jaybird's current running headphones, the Tarah and the X4, are excellent, durable, long-lived workout buds with fantastic sound quality. But if you don't need the X4's special, squishy Comply foam ear tips, and you're OK with losing the storage pouch, the Tarah has everything you need at a sweet price point. The eargels with wings fit securely out of the box and stayed put while trail running, rock climbing, and weight lifting; They weigh less than half an ounce. You can also tinker with the EQ in the Jaybird mobile app, either by choosing one of Jaybird's presets or customizing it yourself.